spbm <1-100>
smlt-virtual-bmac
Configure the virtual Backbone MAC (BMAC) address, which is shared and advertised by both
peers. Configuration of this command is optional.
Command Parameters
- <1-100>
- Specifies the SPBM instance
ID.
- 0x00:0x00:0x00:0x00:0x00:0x00
- Specifies the virtual MAC address.
SMLT virtual BMAC is the optional configuration. If SMLT virtual BMAC is not
configured, the system derives SMLT virtual BMAC from the configured SMLT peer
system ID and the nodal MAC of the device (IS-IS system ID).
- The system compares the nodal MAC
of the device with the SMLT peer system ID configured and takes the small one,
plus 0x01, as the SMTL virtual BMAC. The system also derives SMLT split BEB from
the SMLT peer system ID and nodal MAC of the device.
- The device with the lower system
ID is primary, the device with the higher system ID is secondary.
Command Mode
IS-IS Router Configuration
